Centos 7, a ProLiant BL460c and the QLogic 2432

I spent the last 8 hours trying to get Centos 7 to install on a ProLiant BL460c with a QLogic 2432 SAN card. The short of the matter is that Centos 7 does not support some HP CCISS RAID controllers.

My thread on the centos 7 forum describes my journey. Neither direct install nor upgrade install from Centos 6.6 will work. Rescue boot will not find your Linux installation if you boot from SAN like my blade did.

Just want to make a quick note in case other people run into this most frustrating scenario.

===

I spent the last 8 hours trying to get Centos 7 to install on a ProLiant BL460c with a QLogic 2432 SAN card. The short of the matter is that Centos 7 does not support some HP CCISS RAID controllers.

My thread on the centos 7 forum describes my journey. Neither direct install nor upgrade install from Centos 6.6 will work. Rescue boot will not find your Linux installation if you boot from SAN like my blade did.

Just want to make a quick note in case other people run into this most frustrating scenario.